Screw Conveyor And Parts Middle Hoisting Bearing Screw conveyor hanging bearing device is installed in the connection between the two screw axis shaft, including the bearing seat.The bearing seat is provided with a lifting seat fixed on the conveyor barrel, and the bearing seat is provided with a bearing gland on both sides of the bearing seat, and the installation position is provided with a lubricating oil filling device on the lubrication holes inside and outside the connected bearing seat.The sealing is good. After loading the hanging bearing device into the screw conveyor, the butter should be injected between the bearing and the hanging sleeve through the butter filling nozzle and the oil filling pipe. The purpose of the hanging device is to lubricated, which can effectively avoid the dry grinding of the bearing and the hanging sleeve on the intermediate shaft and prolong the service life of the hanging sleeve and the bearing. Features: 1. Good aligning properties and sealing effect The hoisting bearing device can also use rolling bearing instead of sliding sleeve, large capacity, high speed, long service life. 2. The bearing seat is installed in the shell composed of the left half shell and the right half shell, and the connecting surface is a spherical surface, forming a universal moving joint. 3. Especially suitable for the conveyor working under high speed,high temperature,heavy dust.Screw Conveyor And Parts website:http://www.hwm-parts.com/concrete-batching-plant-parts/screw-conveyor-and-parts/